PEOPLE

Wsqmpmmxvzea2tynhknc
Hey there, I am Ali Alanzi.
Web / Graphics designer (still and motion,) , Cameraman, photographer and video editor using (Final cut)

Work experience

Graphics designer, director
Video editing and graphics motion designer + web designer and web master

Education

(from March 2001 to May 2011)
Yzljgnbk2yrqyqeqr4ss

Education

bachelor degree (to July 2012)
business information systems
Pqi0rxuyaq9kldmhcie2
Mechanical Engineer-MEP with 3 years of Experience

Work experience

Mechanical Engineer (from March 2014 to October 2016)
• Designing and preparation of design drawings for Piping, Plumbing, Fire Protection, HVAC discipline including Pipe/duct sizing, equipment sizing, piping/ducting and equipment layout, in accordance with project specs. • Reviewing & commenting the vendor/supplier drawing. • Preparation of design calculations for equipment, piping system as per the specs. • MEP Design Co-ordination. • Preparation of mark-up drawing for drafting and allocating the drafting/designing jobs between various draughtsmen/designers.

Education

B.E in Mechanical Engineering from Visvesvaraya Technological University (VTU)-Belgaum, Karnataka, India (from April 2008 to May 2012)
Nvt9cpzgor0khcke5z6s

Work experience

Forklift operator (from December 2004 to February 2012)
Loading unloading materials

Education

Vocational (from March 1989 to March 1995)
Mechanic
Hbalxhtmmhwzwu1lbbie
Very reliable hard worker qualified Veterinary Nurse for two years and seven months working full-time including weekends and after hours on call. Plenty of experience in reception customer service skills are excellent. Ready for a change in scenery and keen to excel a career in either Veterinary nursing or anything with a great learning opportunity.

Work experience

Trainee Veterinary Nurse (from February 2014 to October 2016)
Reception including dealing with money(banking)scheduling appointments and filing, customer service, surgery assistance, assistant to Vet and other Vet nurses, caring for patients in hospital, monitoring anaesthetic in surgery, xrays, dental and laboratory work and so on usual duties of Veterinary Nurse

Education

Polytechnic west, Bentley campus Perth WA (from February 2014 to October 2016)
Cert IV veterinary nurse
J8xkvfxfd7mzhjjghcd5

Work experience

Senior Mechanical Designer (from April 2015
- Manage drawing & modeling registers, plan modeling and drawing schedules and time estimates. - Support to project engineers and discipline engineers from feasibility study up to design for construction. - 3D Modelling and 2D Drawings on Inventor 2015 and AutoCAD 2015 of equipment, machines and process plant for onshore and offshore mineral processing. (typically De Beers Diamond mining & exploration ships)
Mechanical Designer / Drafter (from December 2014 to March 2015)
Mechanical Engineering Designer, Piping Designer, Structural Designer - Freelance Drafting and 3D Modelling on various small projects ranging from machine design to Chrome process plant. - This was short-term work until I got a long term contract after I was retrenched in November 2014 when ATEC-PMC closed down.
Design Coordinator / Equipment Designer (from July 2013 to November 2014)
Mechanical Engineer; Mechanical Engineering Designer, Piping Designer, Structural Designer - Manage drawing office resources and budget. - Manage drawing & modeling registers, plan modeling and drawing schedules and time estimates. - Support to project engineers and discipline engineers with project scope and costs estimating from feasibility study up to design for construction. - Write drawing office procedures and codes of practice. - Design, model and coordination of process plants for various minerals in South Africa, Mozambique, Tanzania and Ghana. - Coordinate design reviews in co-operation with various discipline engineers. - Mechanical design and 3D modelling in Inventor and AutoCAD 2014 of various conveyor installations, pump and sumps, tanks, machines, components as well as process plant layouts and equipment assemblies. Design and Model process equipment or machines like Apron Feeders, Bucket Elevators, Air-Slide Conveyors and Belt Conveyors, to be built by ATEC Equipment (Pty) Ltd. - Piping & pump installations design and 3D modelling in Inventor and AutoCAD 2014 for water, air, chemicals and slurries in process plants. This includes, steel rubber-lined pipes, HDPE, PVC, flanged, screwed and welded connections. - Help with the design and coordinate the modeling and drawing of various other process plants. (Bibiani, Nepaque, Aquila, etc.).

Education

Advance Diploma for Mechanical Engineering Technology (from August 2011 to May 2013)
Waqx9haupguykiwvulyw
Looking for an opportunity to develop and improve my knowledge, and also something that can instruct me to an increasing and continuous, always seeking the growth between me and the company. Contribute with my skills for the benefit of this renowned institution, as part of degree of collaborators, having commitment, respect and loyalty as main functions. My qualifications: liability, great relationship, teamwork, perseverance, planning, discipline and skill in administrative routines and Work safety techniques. The professional growth and contribute reducing, minimizing, and even neutralizing risks that may cause occupational diseases, is one of my goals within the company, exercising the function to me intended, by applying the rules of safety and ensuring the health, integrity of all workers, as well as the growth in the team.
Qxazydr5zxsvlw0biam9
I have more 10 years of experience working in a warehouse for a large manufacturing company. My mail duties included filling orders from customers and ensuring they were of high quality and standards.

As a process worker, I learned to work with a variety of packing equipment and learned how to load and unload trailers. I have the ability to work efficiently as a team or independently without supervision and still get the job done correctly and on time

Work experience

Process Worker (from January 2015 to August 2016)
• Unpacking boxes of garments • Hanging garments • Trimming loose threads

Education

Qxazydr5zxsvlw0biam9
Hi My name is Kevin I am 56 single male, and have had experience in apple computers, 5yrs video editing, marketing, gardening,maintenance ( fitter machinist 30yrs) ceramic art,sculpture, potter 20yrs, tuna boat deckhand, offsider to carpenter, 4 years, animal lover, keen observer, self starter,

Work experience

asistant landscaper gardener (from February 2012 to December 2014)
assisted gardener, planting pruning weeding, creek rockwalls, ect
Daw4nnaltojhokg9nqai
As Integrity Specialist Engineer focused in oil and gas industry, I have been worked since 1999 performing and managing projects related to assurance the integrity in offshore and onshore oil and gas facilities, and pipelines, such as: Risk Analysis, Manage of Change, Major Hazard Review Audits, Operational Risk Assessments, Perform mechanical integrity analysis for pressure vessels, and piping systems; supervision and advice activities of preventive corrective and predictive maintenance in oil and gas facilities; supervision in activities of inspection of pipelines using In Line Inspection (ILI) tools; supervision and advice in activities of construction, reparation and rehabilitation of pipelines and process piping systems; performing piping stress analysis using AutoPIPE software and performing mechanical behaviour analysis for static equipment, accessories and spools using ANSYS software; according with American, Mexican, and other International standards, codes, and recommended practices. Specialties: High knowledge in Finite Elements Analysis and Piping Stress analysis tools, specifically ANSYS and AutoPIPE software, performing of integrity assessments in pipelines, process piping systems and pressure vessels; also, high knowledge in CAD platform software, Windows and Office Platforms, and basic knowledge using SAP2000, SAP Business All-In-One and PVElite Software

Work experience

INTEGRITY AND FACILITIES ENGINEER (from September 2013 to February 2016)
Develop and manage projects as part of the Asset Integrity Assurance System in offshore and onshore oil and gas facilities, and pipelines such as: Risk Analysis, assurance audits, operational risk assessments, management of changes, Risk Based Inspection, Non-destructive Tests, mechanical integrity assessments, Performing baseline engineering data for aging facilities, audits (HSE, Process, Integrity); and implement the system of Asset Integrity Assurance. Develop and manage activities related to Non-destructive tests, and integrity mechanical assessments in facilities (static equipment). Perform new projects for onshore and offshore oil and gas facilities, and perform projects to rehabilitation of aging onshore and offshore facilities, and pipelines. Assists to the Operations Team in processes to shut down and start up production plattforms, and separation facilities.

Education

Bachelor degree in Engineering (from August 1996 to June 2001)
Metallurgy Engineering
Ekjd5cm3gbmkbdyzjdmy
21 years of full time work experience in HSE field of Oil and Gas mechanical and civil construction and also in shut downs of the same facilities. Worked more than 8 years in different Middle East countries in the companies well-versed with ISO 9001 & 14001, OHSAS 18001. I mostly worked on senior level of HSE. Preparing HSE plans and procedures and other required documentation of HSE department has been my routine. I got ability to handle international safety standards, which include controlling of employees, assets at field and planning to avoid incidents, promoting HSE culture within the company and to ensure that safety requirements of the process and construction activities are implemented in accordance with the international standards and approved safety documents.

Work experience

HSE (health safety environment) Manager/Supervisor (from April 1995 to September 2016)

Education

3 years Mechanical Engineering+ bachelor degree in humanity (from March 1986
to save people o their work
Vlflha6jo9xbcfgqxnmk
Hi. I have over six years experience in Customer Service/Retail working in a variety of working environments and now want to work in Hospitality. I have a Certificate II in Retail, Certificate II in Business, Certificate III in Business, Certificate III in Hospitality, RSA and RCG. My hobbies include playing tennis, cooking and listening to music. I have excellent communication skills, time management skills, am reliable, punctual, hardworking and love to learn new skills.
Qxazydr5zxsvlw0biam9
• Bachelor of Mechanical Engineering from Bharathiyar University, INDIA (1986 – 1990)
• Postgraduate Diploma in Plastics Engineering from CIPET, Ahmedabad, INDIA (1992 –1993).
• Having more than 25 years’ experience in Machinery Manufacturing, Processing and Projects in Plastics field.
• Did short term course for Finance for non finance professionals by ABBA.

Work experience

Factory Manager (from November 2011
Managing of Factory operations along with purchase and finance. Projects

Education

B.E. Mechanical Engineering (from June 1986 to June 1990)
Mechanical Engineering
Dgptm93kq6plzwxilubi

Work experience

Machine Operator/Mixer/Packer/Robot Operator/Relief Team Leader Duties (from October 1992 to April 2016)
Worked in all Departments as the above position in these areas. Canning Line Bottling line Tetra Pak Combibloc Milk Products. Have some knowledge in QC work. Batching/ Mixing Products such as weighing and transferring products into Trucks. Can work Unsupervised. Hold a current NZ forkhoist ticket. Am willing to sit an Australian Forklift ticket if Needed. Great attendance. Currently working on call as a Packer/Stacker at: Earlee Products Sunny Queen Eggs Aus Bottles and a Machine Operator at Viscount Plastics. Hold a Current Full Queensland Car License and own car. Hold a Current White Card.
Qxazydr5zxsvlw0biam9
I am an experienced Manager/Leader with the skills and experience that closely match the advertised criteria, working for a large outsourcer supporting and working with global clients. My last position was as a Client Delivery Manager position was responsible for delivery of infrastructure services – mainframe, server (unix, wintel), storage. The support covered locations in both Australia and Asia (KL, Singapore, India, Japan) utilizing resources in those locations or from remote management sites.

Below, I have outlined my qualifications and experience as they relate to the advertised criteria

• As a Client Delivery Manager the key measures for success for my position was to deliver to SLA.s through monthly reporting and actions to prevent any breaches through development & delivery of operational metrics & dashboard reporting to support the needs of business divisions, Included were IT performance management oriented metrics with continuous improvement.
• Further I have attained the relevant knowledge of infrastructure operations with strong operational skills in data centre, server and storage management
• Have the capability and success in an engineering approach to infrastructure delivery and customer service-focused delivery (24/7 incident management leadership)
• I have extensive experience in collaborating with overseas resources to delivery agreed services through previous transition of workload to a number of locations. Through remote and onsite support lead and managed the team, identifying and developing talent and managing change.
• The involvement in the development of "as a service" provided a cost effective solution to reduce expenditure.
• Development and Delivery of new process and procedures for the establishment of ITIL - Service Level, Release, Configuration, Third Party Vendor, Availability and Capacity Management was adopted globally
• Managing the creation and maintenance of financial budgets (P&L) with business case submissions for effective cost reductions.

Work experience

Client Delivery Manager (from November 1998 to March 2015)
Managing services provided by the Platform Global Delivery Network (GDN) team for accounts within Asia and Australia. Responsible for the assurance, integration and acceptance of all Platform solutions, strategies and services for both new business/projects and existing services across the account, sector and region Achievements: ▪ APAC Governance and structures required to support the delivery and management of Platform technologies ▪ Implementation of Platform GDN strategies and the effective management thereof including stakeholder management. ▪ Feed into the technology or service standards exceptions registers ▪ Daily, Weekly, Monthly and adhoc operational reporting ▪ Effectively managed relationships with IT delivery teams, and facilitate collaboration between those teams (including external providers) ▪ Financial achievements in line with budget forecast and allocated challenges. ▪ Lead in the Operational issues and establishment of remediation plans ▪ Lead in major service restoration across multiple disciplines. ▪ Vendor engagement and negotiations for additional services with SLAs and support deliverables. ▪ Facilitated the production and delivery of solution components from solution delivery teams including vendors and third party suppliers, manage risks and issues and develop effective mitigation strategies for same. ▪ Staff development and training
Hurwbjbj2nrdqzwnlq02
Hey there, I am Daniel Oliveira. I am based in Queens Park WA and looking at jobs in the Other industry. Thank you for looking at my profile - Daniel

Work experience

Electrical Design (from March 2014 to January 2015)
•Electrical panels design (PLC, inverters, contactors, circuit breakers, etc.) in AutoCAD with operating logic and interlocking between equipment Grade Rack, Overhead Crane with Airlift, Sludge Remover, Screw Conveyor, and others equipment for sanitation area; •Infrastructure projects (metal ducts, pipes, gauge metal framing channel connection box, rectangular duct, cantilever arm, etc.) in Inventor 2014; •Electrical supply list for purchase, meetings with providers and customers; •Lighting design of the water treatment plant and sewage; •Customers: Petrobras, Odebrech and Camargo Correia.
Automation/Electrical Design (from August 2012 to October 2013)
•Electrical and pneumatic designs in EPLAN P8 for car assembly line, panels, interconnection between robots, communication DeviceNet, Ethernet and Profibus; •Material supply list for purchase; •Attendance in field installation, coordination and Project Update; •Form filling, technical descriptions of supply and standard documents. •Customers: Ford, General Motors and Mercedes-Benz.
Automation/Electrical Design (from February 2011 to July 2012)
•Attendance in field installation(panels, cables and robots), coordination and Project Update; •Electrical design in EPLAN P8; •Coordination and general installation of General Motors vehicle production line also assistance in software development PLC Rockwell; •Budget assistance with technical definition of electrical materials, mechanical and pneumatic, preparation schedule in MS Project, meetings with providers. •Customer: General Motors.
Trainee (from August 2009 to February 2011)
•PLC programming RSLogix 5000 Rockwell, network configuration DeviceNet and Ethernet and Startup car assembly lines; •Attendance in field installation (panels, cables and robots) and Project Update; •electrical design in EPLAN P8; •Customer:General Motors.

Education

Mechatric Engineering (from August 2003 to August 2008)

Other

Curtin University - currently General English